13763 Fiji Way, E4
Marina del Rey, CA, US, 90292
Tel:310-822-9814
2013 Beneteau First 20
Designed by the masters of offshore monohulls, this clean, modern centerboarder from Groupe Finot offers performance, comfort, and safety unrivaled by any other boat in its class.
New furling headsail and Tomatsu 6hp outboard as well as a newly rebuild center board mechanism. This boat is ready to sail and enjoy.
Specifications
Engine 1 Specifications
Media Gallery
Continuously evolving over the past 20 years or more, the First 20 has become more aggressive and stylish. Beyond her modern make-over, she offers the best combination of safety, performance, and comfort in her class. Although small, this classic boat can be enjoyed in all weather.
Design in accordance with European Directive requirements and according to CE certification.
• Monolithic hull design in polyester
• Structural counter moulding made with unidirectional fabrics laminated and stuck evenly to the hull
• Deck made of injection moulding (Fibreglass sandwich / Balsa wood / Polyester resin)
• Accessible areas covered in a «Picot» type non-slip surface
• Hull-deck join screwed, bonded and trimmed with 1 bulwark
• Cast iron keel, pivoted and adjusted with a manual system of lifting screw and handle. Mounted with adjustable plates
• 2 retractable polyester rudders with sleeve system
• White coloured hull - Decoration dark grey
RIGGING
• Deck-stepped, freestanding aluminium anodised mast, single spreaders
• Anodised aluminium boom
• Discontinuous stainless steel standing rigging and Dyform
• Shroud chain plates fixed to hull-deck joint
• 1 mainsail tackle mounted on snap shackle in cockpit bottom
• 1 Adjustable boom vang by hoist
• 1 trimming tackle on boom
• Genoa furler
• 2 genoa sheet tracks with back and forth adjustable bearing cars
• Rigging run back to cockpit
• Complete running rigging: 1 Genoa furler line, 1 Genoa halyard,
1 Main halyard, 1 Reef line
• 2 cheek blocks
• 4 clutches
• 1 Jam cleat
• 2 Belaying cleats
• 2 Jamming cleats
WINCHES
• 2 aluminium winches (H08A): Genoa sheet, Halyards and Reef line
• 1 Winch handle
MOORING LINES - MOORING
• Self-draining chain locker
• 1 Stainless steel bow fitting 1 stainless steel bow roller
• 4 Aluminium mooring cleats
SAFETY ON DECK
• 1 stainless steel 3 leg pulpit
• 2 Stainless steel pushpits
• Stainless steel single guardrails and stanchions
COCKPIT
• Self-draining cockpit
• 2 wet lockers with locks
• 2 solid wood footrests on cockpit benches
• Solid wood tiller with jointed extension
• Benches cockpit polyester
AFT TRANSOM
• 1 Stainless steel bathing ladder
• 1 handhold
• Woodwork: Light Alpi teak
• White ceruse oak laminate flooring, Polyester, Non-slip
• Vinyl fabric spar ceiling on deck counter-moulding
• PVC Arredo upholstery
COMPANIONWAY
Headroom: 1,45 m / 4’9’’
• 1 sliding companionway hatch with fitted window
FORWARD CABIN
• Double bed (1,90 m x 1,40 m / 6’3’’ x 4’7’’) - Foam mattress with cover
• 1 circular opening deck hatch
GALLEY
• Storage
SALOON
Headroom: 1,45 m / 4’9’’
• 2 bench seats / Single berths (2,20 m x 0,60 m / 7’3’’ x 2’) with mattress and cover
• Storage
• 2 oilskins pegs
• 2 fixed hull portholes
• 1 12 V 50 Amp battery
• 1 12 V electrical and 6 function panel with fuses
• Navigation lights
• Lighting: Ceiling lights and lamp fittings
• 1 Manual bilge pump
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.